Begin with the manufacturer’s instructions for the exact paddle. Remove loose dust with a clean, dry microfiber cloth. If the maker permits moisture, use a slightly damp cloth and let the paddle dry fully before closing it in a case. Avoid solvents, household cleaners, abrasive pads, and soaking the edge.
- Start dry and use the least aggressive method that removes loose dirt.
- Use moisture or a face eraser only when the paddle maker permits it.
- Cleaning can remove grime; it cannot recreate texture that has worn away.
- Keep the paddle away from prolonged heat, moisture, and loose items that strike the face.
Start with the paddle maker’s instructions
“Raw carbon” describes a type of face construction, not one universal coating or cleaning method. Follow the care guidance for the exact brand and model. If that guidance is unavailable, stay conservative and avoid adding chemicals, heat, or abrasion.
A conservative after-play routine
-
Inspect the face and edge.
Look for cracks, lifting material, or a separating edge guard before cleaning. -
Remove loose dust dry.
Use a clean microfiber cloth with light pressure. -
Add moisture only if permitted.
If the maker allows it, use a slightly damp cloth rather than soaking the face or edge. -
Dry before covering.
Let the paddle dry fully before placing it in a sleeve or bag.
What to avoid
| Avoid | Why |
|---|---|
| Household solvents or cleaners | Compatibility with the face, graphics, edge adhesive, and warranty is not established. |
| Abrasive pads or hard scraping | They can alter the surface rather than simply remove loose dirt. |
| Soaking | Water can reach edge seams, adhesive, or the handle assembly. |
| Prolonged vehicle heat | Heat limits vary by maker and have not been verified for every current paddle. |
When to consider a face eraser
The store’s Paddle Face Eraser is marketed for textured and raw-carbon faces, but compatibility has not been verified across every coating or manufacturer. Use one only when the paddle maker permits it, test gently, and stop if the surface appearance changes.
Removing grime may reveal existing texture. It cannot rebuild texture that has physically worn away, and this store has not independently measured a before-and-after change in spin.
Protect the edge, grip, and storage environment
Wipe moisture from the grip, keep hard items from striking the paddle face inside a bag, and store the paddle dry and out of prolonged heat. Edge tape may help with routine court scrapes, but it is not a structural repair for a cracked face or separating edge guard.
Stop and inspect these warning signs
- A crack, soft spot, new rattle, or loose handle
- An edge guard lifting away from the face
- A surface that changes colour or appearance while cleaning
- Damage covered by a manufacturer inspection or warranty process